Our Commitment: Accessible, Adaptable and Affordable activities for all.
(978) 419-1824 Shop Now
Shop Now

10×10 cotton and fleece candle mat kit – Red and Black Houndstooth with White Snowflake pattern – includes white shoelaces – SCENTSY FRAGRENCE FLOWER NOT INCLUDED

$12.99

0 out of 5

10×10 Cotton and Fleece two piece candle mat kit – Red and Black Houndstooth with White Snowflake pattern – includes White Shoelaces to lace together- pre-punched holes in the fabric have tactile borders that enable the holes to be identified by touch. The colors in this pattern make a good Christmas display.  Please note that the SCENTSY FRAGRENCE FLOWER DISPLAYED ON CANDLE MAT IS NOT INCLUDED WITH THE MITSY KIT BUT CAN BE PURCHASED SEPARATELY THROUGH LINKS INCLUDED BELOW AT OUR PARTNER NINI’S SITE.  Nini is a visually impaired Scentsy business owner who also enjoys Mitsy Kit adaptive crafting.  We are proud to be partnering with her to provide our customer’s access to the Scentsy products which complement our kits.  See Nini’s story here: https://nini.scentsy.us/consultant/bio

See Candle Mat or Hot Pad Project Assembly Simple Text Instructions Below:

*Use 1 ribbon strand or shoelace on each side to lace up project kit:

  1. If using plastic needle and ribbon, insert a ribbon strand into eye of plastic needle leaving a short tail (~2”).  If using a shoe lace proceed to step 2.
  2. Start lacing in corner hole by going top down through tactile bordered holes, in all layers of fabric.
  3. Pull ribbon or shoelace through until leave about a 6” tail on top. Secure tail under plastic clip in corner.
  4. Lace with Overcast stitch:pull ribbon or shoe lace over top of fabric edge and insert needle top down through the next hole (to right or left of current hole depending upon which direction you are stitching), repeat for all holes stopping before next to last hole before corner.  At the next to last hole BEFORE THE CORNER insert needle up from bottom and pull ribbon through leaving tail on top.
  5. Complete stitching 4 sides of project. Repeat steps 1-4 to complete lacing 4 sides of project with overcast stitch.
  6. Remove 8 plastic clips from 4 corners of project.
  7. Tie double knots and bows with ribbon or shoe lace tails in four corners of project.
  8. Admire, use, or give away your beautiful creation as a gift! 😄

Feel free to call us with any questions at 978-419-1824.

TO VIEW / PURCHASE SCENTSY FRAGRENCE FLOWER AS AN ACCESSORY TO DISPLAY ON TOP OF CANDLE MAT CLICK HERE: https://nini.scentsy.us/shop/c/25072/sola-wood-fragrance-flower-diffuser

10 in stock

Categories: , . Tags: , , .

Description

10×10 Cotton and Fleece two piece candle mat kit – Red and Black Houndstooth with White Snowflake pattern – includes White Shoelaces to lace together- pre-punched holes in the fabric have tactile borders that enable the holes to be identified by touch. The colors in this pattern make a good Christmas display.  Please note that the SCENTSY FRAGRENCE FLOWER DISPLAYED ON CANDLE MAT IS NOT INCLUDED WITH THE MITSY KIT BUT CAN BE PURCHASED SEPARATELY THROUGH LINKS INCLUDED BELOW AT OUR PARTNER NINI’S SITE.  Nini is a visually impaired Scentsy business owner who also enjoys Mitsy Kit adaptive crafting.  We are proud to be partnering with her to provide our customer’s access to the Scentsy products which complement our kits.  See Nini’s story here: https://nini.scentsy.us/consultant/bio

See Candle Mat or Hot Pad Project Assembly Simple Text Instructions Below:

*Use 1 ribbon strand or shoelace on each side to lace up project kit:

  1. If using plastic needle and ribbon, insert a ribbon strand into eye of plastic needle leaving a short tail (~2”).  If using a shoe lace proceed to step 2.
  2. Start lacing in corner hole by going top down through tactile bordered holes, in all layers of fabric.
  3. Pull ribbon or shoelace through until leave about a 6” tail on top. Secure tail under plastic clip in corner.
  4. Lace with Overcast stitch:pull ribbon or shoe lace over top of fabric edge and insert needle top down through the next hole (to right or left of current hole depending upon which direction you are stitching), repeat for all holes stopping before next to last hole before corner.  At the next to last hole BEFORE THE CORNER insert needle up from bottom and pull ribbon through leaving tail on top.
  5. Complete stitching 4 sides of project. Repeat steps 1-4 to complete lacing 4 sides of project with overcast stitch.
  6. Remove 8 plastic clips from 4 corners of project.
  7. Tie double knots and bows with ribbon or shoe lace tails in four corners of project.
  8. Admire, use, or give away your beautiful creation as a gift! 😄

Feel free to call us with any questions at 978-419-1824.

TO VIEW / PURCHASE SCENTSY FRAGRENCE FLOWER AS AN ACCESSORY TO DISPLAY ON TOP OF CANDLE MAT CLICK HERE: https://nini.scentsy.us/shop/c/25072/sola-wood-fragrance-flower-diffuser

Additional information

Weight .50 lbs
Dimensions 13 × 13 × .50 in

Reviews

There are no reviews yet!

Be the first to write a review

*

Satisfaction guarantee - If for any reason you are not satisfied with your purchase please call us and we will refund your money upon return receipt of the product.

Complete the collection

  • Protect your counter tops from hot pans with this 10×10 cotton hot pad kit – yellow lemons on white pattern – includes white shoelaces to lace up the cotton face with flannel and thinsulate batting layers – pre-punched holes in the fabric have tactile borders that enable the holes to be identified by touch. The colors in this pattern are great for kitchen decour.

    See Candle Mat or Hot Pad Project Assembly Simple Text Instructions Below:

    *Use 1 ribbon strand or shoelace on each side to lace up project kit:

    1. If using plastic needle and ribbon, insert a ribbon strand into eye of plastic needle leaving a short tail (~2”).  If using a shoe lace proceed to step 2.
    2. Start lacing in corner hole by going top down through tactile bordered holes, in all layers of fabric.
    3. Pull ribbon or shoelace through until leave about a 6” tail on top. Secure tail under plastic clip in corner.
    4. Lace with Overcast stitch:pull ribbon or shoe lace over top of fabric edge and insert needle top down through the next hole (to right or left of current hole depending upon which direction you are stitching), repeat for all holes stopping before next to last hole before corner.  At the next to last hole BEFORE THE CORNER insert needle up from bottom and pull ribbon through leaving tail on top.
    5. Complete stitching 4 sides of project. Repeat steps 1-4 to complete lacing 4 sides of project with overcast stitch.
    6. Remove 8 plastic clips from 4 corners of project.
    7. Tie double knots and bows with ribbon or shoe lace tailsin four corners of project.
    8. Admire, use, or give away your beautiful creation as a gift! 😄

    Feel free to call us with any questions at 978-419-1824.

Top
0