-
0$0.00
- No products in the cart.
Christmas
Showing 1–12 of 15 results
-
10×10 Cotton and Fleece two piece candle mat kit – Red and Black Houndstooth with White Snowflake pattern – includes White Shoelaces to lace together- pre-punched holes in the fabric have tactile borders that enable the holes to be identified by touch. The colors in this pattern make a good Christmas display. Please note that the SCENTSY FRAGRENCE FLOWER DISPLAYED ON CANDLE MAT IS NOT INCLUDED WITH THE MITSY KIT BUT CAN BE PURCHASED SEPARATELY THROUGH LINKS INCLUDED BELOW AT OUR PARTNER NINI’S SITE. Nini is a visually impaired Scentsy business owner who also enjoys Mitsy Kit adaptive crafting. We are proud to be partnering with her to provide our customer’s access to the Scentsy products which complement our kits. See Nini’s story here: https://nini.scentsy.us/consultant/bio
See Candle Mat or Hot Pad Project Assembly Simple Text Instructions Below:
*Use 1 ribbon strand or shoelace on each side to lace up project kit:
- If using plastic needle and ribbon, insert a ribbon strand into eye of plastic needle leaving a short tail (~2”). If using a shoe lace proceed to step 2.
- Start lacing in corner hole by going top down through tactile bordered holes, in all layers of fabric.
- Pull ribbon or shoelace through until leave about a 6” tail on top. Secure tail under plastic clip in corner.
- Lace with Overcast stitch:pull ribbon or shoe lace over top of fabric edge and insert needle top down through the next hole (to right or left of current hole depending upon which direction you are stitching), repeat for all holes stopping before next to last hole before corner. At the next to last hole BEFORE THE CORNER insert needle up from bottom and pull ribbon through leaving tail on top.
- Complete stitching 4 sides of project. Repeat steps 1-4 to complete lacing 4 sides of project with overcast stitch.
- Remove 8 plastic clips from 4 corners of project.
- Tie double knots and bows with ribbon or shoe lace tails in four corners of project.
- Admire, use, or give away your beautiful creation as a gift! 😄
Feel free to call us with any questions at 978-419-1824.
TO VIEW / PURCHASE SCENTSY FRAGRENCE FLOWER AS AN ACCESSORY TO DISPLAY ON TOP OF CANDLE MAT CLICK HERE: https://nini.scentsy.us/shop/c/25072/sola-wood-fragrance-flower-diffuser
-
10×10 Cotton and Fleece two piece candle mat kit – Lab dogs in red truck with green landscape pattern – includes red shoelaces to lace together- pre-punched holes in the fabric have tactile borders that enable the holes to be identified by touch. The colors in this pattern make a good Christmas display. CANDLE IS NOT INCLUDED.
See Candle Mat or Hot Pad Project Assembly Simple Text Instructions Below:
*Use 1 ribbon strand or shoelace on each side to lace up project kit:
- If using plastic needle and ribbon, insert a ribbon strand into eye of plastic needle leaving a short tail (~2”). If using a shoe lace proceed to step 2.
- Start lacing in corner hole by going top down through tactile bordered holes, in all layers of fabric.
- Pull ribbon or shoelace through until leave about a 6” tail on top. Secure tail under plastic clip in corner.
- Lace with Overcast stitch:pull ribbon or shoe lace over top of fabric edge and insert needle top down through the next hole (to right or left of current hole depending upon which direction you are stitching), repeat for all holes stopping before next to last hole before corner. At the next to last hole BEFORE THE CORNER insert needle up from bottom and pull ribbon through leaving tail on top.
- Complete stitching 4 sides of project. Repeat steps 1-4 to complete lacing 4 sides of project with overcast stitch.
- Remove 8 plastic clips from 4 corners of project.
- Tie double knots and bows with ribbon or shoe lace tails in four corners of project.
- Admire, use, or give away your beautiful creation as a gift! 😄
Feel free to call us with any questions at 978-419-1824.
-
This kit provides you with the fabric, plastic needle, and ribbon needed to create a set of two 4.5″ square cotton and fleece coasters or sachets. The fabric pattern includes light green, white and red iced Christmas Cookies on a light blue background. The kit is easily put together by lacing the pre-punched holes in the fabric with tactile borders that enable the holes to be identified by touch.
These kits can be made as coasters – which are great tactile place markers for the blind or visually impaired to feel where a drink is set on the table – or after lacing three sides of the fabric with ribbon you can insert scented cotton balls, or as displayed in one of our pictures try inserting a Scentsy Pak, to fill as a sachet before closing the fourth side. Please note that the SCENTSY PRODUCTS ARE NOT INCLUDED WITH THE MITSY KIT BUT CAN BE PURCHASED SEPARATELY THROUGH LINKS INCLUDED BELOW TO OUR PARTNER NINI’S SITE. Nini is a visually impaired Scentsy business owner who also enjoys Mitsy Kit adaptive crafting. We are proud to be partnering with her to provide our customer’s access to the Scentsy products which complement our kits. See Nini’s story here: https://nini.scentsy.us/consultant/bio
See Coaster / Sachet Project Assembly Simple Text Instructions In Description Section Below.
-
No-sew Mitsy Kit Christmas JOY Wall Hanging kit.
The completed project will be a ten-inch wide by 30 inches long red and white wall hanging with JOY spelled out vertically on three red fleece ten-inch squares with white ribbon stitched around each square, small white bows in the squares’ corners, and a dowel and white ribbon for hanging. A simple running stitch is used on this kit as it makes it look like stitched blocks – so cute! There is firm interfacing in between the red fleece squares and the cut-out letters are 5 inches wide by 7 + inches tall, made from a white foam material so it is tactile as well.The cost for the 30-inch by 10-inch wall hanging kit will be $25.00, plus tax if you live in Florida – and this will include free shipping in the US.
Remember to type in ShipFree in the coupon code with no spaces to get your free shipping applied to the order. -
This cute large dog bandana kit is a no-sew project which you can quickly lace together with a plastic needle and fleece ribbon. The kit provides you with a 13-inch fleece fabric square folded in half into a half square triangle and two 35 inch fleece ribbons. The fleece bandana will measure 17 inches across the long side of the triangle, and 9 inches in height from the point of the triangle. Once you adjust the length of the fleece neck straps to fit the dog’s neck size it can be simply pulled on and off over the dog’s head because of the stretch in the fleece strap. Choose which fabric pattern you want for your dog bandana from the following options and include your choice in the order notes, or feel free to give us a call at 978-419-1824.
FLB1) Red fleece with white snowflakes and red fleece strips
FLB2) Light Gray fleece with white snowflakes and snowmen wearing red and green scarf and hats and red fleece strips
FLB3) Off white fleece with red snowflakes and red fleece strips
FLB4) White fleece with red and gray snowflakes and red fleece strips
FLB5) Black fleece with red hearts and gray paw prints and white dog bones with black fleece strips
FLB6) Gray fleece with black white and gray dog with red paw prints and words I woof you in black with black fleece strips
FLB7) Red fleece with white shooting stars and white fleece strips
FLB8) Off white fleece with tan, gray and black miscellaneous dogs with dog bones, fire hydrants and dog houses and black fleece strips
FLB9) Light teal fleece with teal, blue and white paw prints in form of heart with navy fleece strips
FLB10) Black teal fleece with tan, white and gray paw prints in form of heart with black fleece strips
FLB11) White fleece with royal blue silhouette of lab dog with white stitching wearing a red bandana, and has red scattered stars with red fleece strips
FLB12) Bright blue fleece with large black paw prints and black fleece strips
FLB13) Light seafoam green fleece with tan, rust, and brown and white corgi dogs and white fleece strips
See pictures in the product gallery. See assembly instructions in Description Section.
-
This cute large dog bandana kit provides you with a cotton or flannel 13-inch fabric square with serged borders folded in a half square triangle and clipped to a 35-inch fleece ribbon. The cotton bandana will measure 17 inches across the long side of the triangle, and 9 inches in height from the point of the triangle. Once you adjust the length of the 35-inch fleece neck strap to fit the dog’s neck size it can be simply pulled on and off over the dog’s head because of the stretch in the fleece strap. Choose which fabric pattern you want for your dog bandana from the following options and include your choice in the order notes, or feel free to give us a call at 978-419-1824.
DB6) Gray Flannel fabric with white, tan, gray and black puppies and red, tan, and white dog bones with black fleece strip.
DB7) Gray Flannel fabric with white, tan, and gray dogs and bones with blue fleece strip.
DB3) Green, Red and tan country side Cotton fabric with red pick up trucks carrying blonde and black lab pups and blankets in the truck bed, with a license plate that says Dog Days, and a red fleece strip.
DB4) Black with Red and Green Poinsettia flowers and leaves and black fleece strip.
DB5) Black and Red Flannel fabric with off-white snowflakes and deer silhouettes with black fleece strip.
-
13” wide by 50” long fleece table runner – Red Truck With Christmas Tree and Lab Dog pattern includes:
- 2 fleece triangles on each end in Red Truck With Christmas Tree and Lab Dog pattern
- 2 green solid fleece squares surrounding 1 center square in same Red Truck with Christmas Tree and Lab Dog pattern as triangle ends.
This project uses plastic safety needle and white fleece ribbon for lacing through pre-punched holes in fabric with tactile borders to guide lacing by touch.
See 13 by 50 inch Fleece Table Runner Assembly Instructions under Description section below.
Sale! -
13” wide by 50” long fleece table runner – Winter / Christmas Snowman Pattern includes:
- 2 fleece triangles on each end in Snowman pattern with Gray Fence background and White snowmen wearing Red and Black Checkered Scarf and Hat with Green trim,
- 2 Red fleece squares with writings of joy, love, and be merry in white print surrounding 1 center square in same Snowman pattern as triangle ends.
This project uses plastic safety needle and white fleece ribbon for lacing through pre-punched holes in fabric with tactile borders to guide lacing by touch.
See 13 by 50 inch Fleece Table Runner Assembly Instructions under Description Section below.
Sale! -
This cute small dog bandana kit provides you with a cotton or flannel 10-inch fabric square with serged borders folded in a half square triangle and clipped to a 30-inch fleece ribbon. The cotton bandana will measure 13 inches across the long side of the triangle, and 7 inches in height from the point of the triangle. Once you adjust the length of the 30-inch fleece neck strap to fit the dog’s neck size it can be simply pulled on and off over the dog’s head because of the stretch in the fleece strap. Choose which fabric pattern you want for your dog bandana from the following options and include your choice in the order notes, or feel free to give us a call at 978-419-1824.
DB1) Black Cotton fabric with tan and white plaid silhouettes of labradors and other dogs and black fleece strip.
DB2) Blue, Red, and Green tie die Cotton fabric with small black paw prints and black fleece strip.
DB3) Green, Red and tan country side Cotton fabric with red pick up trucks carrying blonde and black lab pups and blankets in the truck bed, with license plate that says Dog Days, and a red fleece strip.
DB4) Black with Red and Green Poinsettia flowers and leaves and black fleece strip.
DB5) Black and Red Flannel fabric with off-white snowflakes and deer silhouettes with black fleece strip.
DB6) Black cotton fabric with white, tan, gray and black puppies and red, tan, and white dog bones with black fleece strip.
-
Small drawstring bag kit (7”x 4.5”) made with Blue Cotton fabric depicting Angels carrying gifts.
This is our adorable small gift bag kit! Perfect for putting the finishing touch on that special little gift that you want wrapped with your unique touch, and then the bag will be re-usable for the recipient as well! This moderate level kit requires use of a regular needle and thread, but would be a great entry level moderate kit as there is very little stitching to complete the project. Tactile guides are sewn on all perimeters of fabric to enable sew by touch. Recommend crewel size 3 needle and thread for hand sewing. See accessories for more information on notions.
See Description section below for text kit assembly instructions.
-
Blue Cotton with Angels holding star topped wands Drawstring gift bag kit (7”x 4.5”)
This is our adorable small gift bag kit! Perfect for putting the finishing touch on that special little gift that you want wrapped with your unique touch, and then the bag will be re-usable for the recipient as well! This moderate level kit requires use of a regular needle and thread, but would be a great entry level moderate kit as there is very little stitching to complete the project. Tactile guides are sewn on all perimeters of fabric to enable sew by touch. Recommend crewel size 3 needle and thread for hand sewing. See accessories for more information on notions.
See Description section below for text kit assembly instructions.
-
Blue Cotton with Angels holding star topped wands Drawstring gift bag kit (7”x 4.5”)
This is our adorable small gift bag kit! Perfect for putting the finishing touch on that special little gift that you want wrapped with your unique touch, and then the bag will be re-usable for the recipient as well! This moderate level kit requires use of a regular needle and thread, but would be a great entry level moderate kit as there is very little stitching to complete the project. Tactile guides are sewn on all perimeters of fabric to enable sew by touch. Recommend crewel size 3 needle and thread for hand sewing. See accessories for more information on notions.
See Description section below for text kit assembly instructions.
Showing 1–12 of 15 results